Preparation

• Move furniture out of the area where the tiles are being installed
• Bring the installation area and materials to room temperature for 48 hours before installation.
• Make sure the floor you’re laying over is clean, dry and flat.

Finishing Up

• Clean adhesive from tile surfaces with a wet cloth.
• Fasten trim and moldings to the wall, not the flooring.
• Avoid heavy traffic on the new installation for 72 hours while adhesive sets.

Preparation

• Move furniture out of the area where the tiles are being installed
• Bring the installation area and materials to room temperature for 48 hours before installation.
• Make sure the floor you’re laying over is clean, dry and flat.

Finishing Up

• Clean adhesive from tile surfaces with a wet cloth.
• Fasten trim and moldings to the wall, not the flooring.
• Avoid heavy traffic on the new installation for 72 hours while adhesive sets.

Preparation

• Clean the Subfloor.
• Pull up the existing flooring.
• Check that your moisture barrier, underlayment and plank fit under your door casing and door.
• If you’re gluing the new flooring to the subfloor, use a sander to remove paint, oil, wax, adhesives, sealers or other material.

Finishing Up

• Avoid heavy traffic on the new installation for 72 hours while adhesive sets.

Preparation

• Make sure ALL furniture is moved out of the area of installation.
• Pull up the existing flooring.
• Make sure the area is dry.

Finishing Up

• Avoid heavy traffic on the new installation for 72 hours while adhesive sets.

Preparation

• Furniture is step one. Remove all furniture and other objects and materials from the areas to be carpeted.
• Disconnect and reconnect electronics such as computer, TV etc..
• If you prefer to remove your present floor covering, do it at least one day prior to installation to allow for cleanup floor preparation.
• If removing old carpet, please leave tack strips in place and pull the staples out of the floor from the original pad.